A carpet or rug is used as a decorating layer on a floor, built by concrete, hardwood, or tiles. Installation of a wall or even a closet on top of the carpet is a bit challenging. Can you build a wall on top of the carpet?
This article provides the direction to achieve it by giving the topmost solutions. Whether it’s home or commercial you can do building walls over carpeting.
But let’s have a quick insight about carpet installation. Wall carpeting and carpet flooring add a glamorous look to the interior space of an area.
If you want a seamless and elegant appearance in flooring, your choice would be wall-to-wall carpeting. However, carpet tiles offer you more customization of new designs when you install carpet.
Wall-to-wall carpets may not budget-friendly. But it ensures the luxurious look of the space and underfoot comfort in your room.
Whatever your choice on carpeting you may wish to build a wall over an existing carpet or rug at some point.
So, let’s make a DIY project to install the wall. You have to make sure that the existing carpet is stretched and secured as it is, throughout this project. A few tools will be needed to trace and prepare the area for the wall which will be replaced.
First, the area should be marked on the floor and ceiling where the wall is to be installed. This can be done using a marker and plumb line. Then this project can be executed based on two methods.
Method 1
Preparation of top and base plates needs to be done according to measurements. Leave a gap by placing a mark for each stud on both plates. Plates and studs may be made of bamboo or wood.
Joists need to be screwed in order to place them on the ceiling.
Screw the top plate to the joists and the base plate to the floor directly. A hammer drill is used to drill holes for Tapcon screws.
How to secure holes using a quality hammer drill and bit?
Diameters of holes should be compatible with the size of Tapcons. A good hammer drill along with a bit must ensure this. Otherwise, the entire frame might not get attached to the surface properly.
Bosch Cordless Impact Drill Review
Bosch Cordless Impact Drill is a great investment with a low budget for installing Tapcon screws. It is easy to be held without a wire to do the job with extra care.
Is it necessary to choose the right type of hammer drill?
The whole task relies especially on the stability of the wall on the carpet or rug. So, the right type of hammer drill should give a better job when installing the frame.
- The style of grip makes it more comfortable to hold and handle carefully.
- A single sleeve chuck makes it easy to remove and install the bit with less time.
- LED light placed on top of the left side of the grip illuminates the workspace.
- Two Lithium-ion batteries keep it working for more hours.
- The edges of the grip are smooth enough to hold more comfortably.
- It does not look like a wired drill anymore since it is lightweight.
- It is rock solid on concrete, brick, or light to thick metal sheets.
- It can also replace as a screwdriver.
- Portability helps to make the task simple to be executed with fewer problems.
However, the corded hammer drill might be still powerful compared to this. Draining the batter eventually hinders the energy toward drilling the material surface.
The product rating is 4.8 out of 5
Once the plates are attached, studs should be located and installed between the plates. Make sure they fasten together to avoid unnecessary space in between them.
Then wooden drywall should be installed perfectly to lay on the studs. This can be done using screws with a hammer drill.
Finally, baseboards are utilized to fill the gap between the carpet and the wall.
Method 2
This method is straightforward way compared to the first method. First, you have to cut or trim through the carpet and pad with the use of a suitable tool. Make sure the strips should stay aligned with the traces of the base plate of the wall.
Now you can replace the wall by removing the strips from the carpet. Both sides of the carpet should not leave large gaps in-between the wall and the carpet.
The next step is to re-stretch the carpet and padding. Tack down the carpet into the floor and cover gaps using tacks. Another option is to get the carpet glued to the floor.
you have to assure that every corner of the carpet around the wall is fastened back to the floor. A baseboard can be used as seams fill the gaps between the border of the wall and carpet.
So, either way, you can successfully install a wall over a carpet.
Can you build a wall on top of the carpet – Final thoughts?
People often consider doing some extensions to their interior home on some occasions. It will be an area inside the house like bedrooms, tv lobby, storeroom, kitchen, etc. which needs to be separated by walls.
Wall to wall carpets or rugs vs carpet tiles
It is indeed a bit challenging when considering doing those extensions over wall-to-wall carpeting. Because, unlike carpet tiles, wall-to-wall carpets or rugs are more prone to be damaged when installing walls over them.
However, it seems people believe or think that it is impossible to build walls over wall-to-wall rugs or carpeted flooring. But the installation of walls can be done with or without making any alterations to the carpet.
If you decide to build the desired walls over the carpet without cutting it through, you have to make sure the frames are properly attached to the floors or ceilings. This will be easily fulfilled with the help of a quality hammer drill, ensuring the accurate diameters for Tapcon screws.
Transport Properties Of Cement
Contents
