The pool is one of the best ways to relax after a full working day. But, if the pool is not clean properly, it may be very unhygienic for your health. The algae grow in the pool water will ruin the pool beauty.
Every homeowner wants a clean a beautiful pool for swimming and spending time with family. The algae remove with a vacuum. But, vacuuming is an expensive method. Everyone can’t afford vacuum cleaners to filter it.
You should need to try some other ways to get algae out of your pool without much effort.
What Are The Signs Of Algae Attack On The Pool?
Algae in the pool in the high amount are dangerous for health. The dead algae and debris make the surface dirty and unhygienic. It is invisible if present in a small amount.
Following are the signs:
- If they are grown in the pool, you will see discoloration in the pool water. Also, the water becomes dirty and dull or murky.
- The greenish and bluish color on the stairs and pool walls
- If you can observe these signs in your water pool, immediately clean the pool with these solutions.
When And How Pool Get Algae?
It is always found favorable conditions to grow. It is always present in the pool, and by using the finest conditions, it overgrows and causes many problems. Many are the reasons such as:
- Warm weather
- Change in PH and Temperature level
- Low chlorine in pools
- Not properly cleaning or pumping
- clogged filter
Pre-cleaning Precautions Or Things
Some of the things that you do before cleaning the pool to get rid of it
Brush the pool walls;
Remove the algae and dirt with a brush. Use a ladder and clean the sides by scratching algae perfectly. They help to slaughter the algae when chemicals dissolve in the pool.
Check the pump carefully:
If they are not working correctly or is waste clogged, it can cause serious problems. The stagnant water is a suitable condition for growth. Perfect circulation is required to protect your pool.
Clean the filters:
Filters in the pool play a better role in water circulation. In a filter, without a vacuum, the dust can get easier. Turning off the filtration system and clean it carefully.
If the debris clogged the filters, use a garden hose for safety.
Ways To Get Active Algae Out Of The Pool Without A Vacuum
Many methods are available on the internet to keep the pool hygiene. But, you must know the effectiveness of all ways before removing the algae. Many things eliminate the algae. But at the same time, they ruin the water quality.
Always choose the good cleaner option for your pool.
1. Use shock products:
Don’t be wonder after hearing the shock product name. These products are available in the market to kill and eliminate them from the pool without a vacuum. The well-known shock product is SODIUM HYPOCHLORITE.
How to apply this killing product?
You need to be very careful while applying this product directly in the pool. Follow these steps to use them in a better way.
Wear plastic gloves in your hands. The Sodium hypochlorite particles are very reactive. It can damage your hands.
Mix only one pound in a five-gallon solvent. Make sure that the solvent is fresh. Prepare additional 15 gallons to 20 gallons according to the pool area.
Double the amount of shock if it is present in excess amount.
Pour the mixture into algae-affected areas. One dose is enough to kill the algae.
You should apply it the night because it remains for a whole night. This thing is getting more chances to kill the algae without vacuum.
The Sodium hypochlorite will release the chlorine that kills the algae. When algae become
dead, accumulate it, and wash the surface.
2. Use Algaecide:
After vacuum, this is another effective and frequent killer that contains a fast reactive agent. Whether you need specific antacids to kill algae. You can Prevent the pool floor from other germs and bacteria by using it.
How to apply algaecides in the pool?
You can take specific forms from green, yellow, and black algae. First, identify the different types of algae like black, yellow, or any other, then buy them.
Run the pump in the pool to circulate the water.
Throw just 16 ounces in a 10,000-gallon pool.
Wait for 24 hours for effective results. Runs the filter until it is dead and remove from pools.
It is used to get rid of dirt and waste that might be harmful during swimming.
How You Will Remove Dead Algae From The Pool Instead Of Vacuum?
Sometimes the dead algae accumulate in the bottom of the pool. It is hard to filter out. If you want to remove it as soon as possible, follow this step:
Brush the sides by scrubbing them to collect clumps of green algae.
Use a telescopic pole with a hose with a vacuum port. They wipe all the things quickly. Attach a bag with it to collect debris. You may use chlorine because it can’t harm the swimmers during swimming.
The skimmer net filtered the sand and other contaminants to clear the spores.
The flocculant will kill the algae that float on the top of the surface and coagulate at the bottom. Then easily vacuum it or remove it by hand.
Final Thoughts:
Usually, people vacuum the pool to remove debris that makes the liquid cloudy. The algae and leaf settled in the ground that starts to hygiene the pool for swimming. Thoroughly scrub all things with a brush and remove them without vacuum.
The vacuum is an expensive method than other methods. You will need a filter and skimmer to get algae out of the pool without a vacuum.
But, you can vacuum it after applying other methods for better results. Plus, the robotic vacuum may quickly work but, everyone not affords the home vacuum cleaner. So, you can use different ways rather than a line vacuum cleaner.
Reference
Contents
